DC Audio 2.5k Amplifier

The 2.5k competition series amplifier is rated as a 2,500 watt mono block. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when linked for almost 6000 watts from a pair. It comes with a bass knob and a clipping indicator.

Output Power (RMS):

1000x1 @ 4 ohms 14.4 volts
1700x1 @ 2 ohms 14.4 volts
2500x1 @ 1 ohms 14.4 volts
5000x1 @ 2 ohm 14.4 volts LINKED
2900x1 @ 1 ohm 16.0 volts
5800x1 @ 2 ohm 16.0 volts LINKED

Key Features:

1 ohm stable
Variable low pass filter
Variable subsonic filter
Variable bass boost
RCA Pass Thru
Linkable
Wired remote control
Clipping indicator
8awg Speaker Terminals
1/0awg Power and Ground Inputs
Tiffany RCA Jacks
MAX VOLTAGE 16.0 VDC

Full Specs:

DC Amp Model:	2.0k
Input Sensitivity	6V~0.2V
Frequency Response	12Hz~264Hz
24dB / Octave Crossover	YES
Low Pass	35Hz ~ 250Hz
Subsonic Filter	10Hz-50hz
Bass Boost @45hz	0 ~ 9db
Phase Shift	0 ~ 180
Remote Control	Yes
Clip Indicator	Yes
Signal to Noise Ratio	dB98
Damping Factor	400<
THD @ 4ohms	Less than 0.1%
Fuse Rating	External 250 amp
LED Status Lights	Power and Protect
Master/Slave	YES
Heatsink Length	13.78"/350mm
Heatsink Width	9.38"/238mm
Heatsink Height	2.35"/59.6mm