Down4Sound JP8 v1.5 Camo Amplifier | 800+W RMS

Disclaimer

This amplifier has been hydro dipped and may exhibit imperfections, as the design is not applied through painting.

The Down4Sound JP8 v1.5 Camo Amplifier is a compact 800 plus watts RMS monoblock car amplifier built for car audio systems that demand strong subwoofer power and aggressive custom style. Designed through extensive research and development in Las Vegas and Florida, this amplifier combines classic old school car audio aesthetics with modern Class D efficiency and reliability.

Finished in a unique hydro dipped camouflage pattern, the JP8 v1.5 Camo is designed to stand out in custom installs while delivering clean, hard hitting bass for daily driven and performance builds.

Proven 800 Plus Watts RMS Performance

The JP8 v1.5 Camo is optimized for subwoofer applications and has been independently tested to verify real world output. It provides stable, efficient power across multiple impedance loads.

Independent tested power at 14.4 volts

• 511 watts RMS at 4 ohm

• 892 watts RMS at 2 ohm

• 1256 watts RMS at 1 ohm

Manufacturer rated output

• 700 watts at 1 ohm at 12 volts and 850 watts at 1 ohm at 14.4 volts

• 500 watts at 2 ohm at 12 volts and 650 watts at 2 ohm at 14.4 volts

• 490 watts at 4 ohm at 12 volts

• 2300 watts linked at 2 ohm at 14.4 volts

Operating voltage range is 9 to 16 volts, supporting consistent performance with a wide variety of vehicle electrical systems.

Retro styling with modern cooling

The retro inspired CAMO SKOOL design pays tribute to classic car audio gear while integrating modern performance features. An internal cooling fan helps maintain safe operating temperatures during extended listening sessions. A plexiglass bottom plate adds a premium look and allows visibility of internal components in show builds.

Aluminum bass knob with system monitoring

Included is a new aluminum bass knob with a built in voltage and temperature meter. This gives you quick bass control and real time amplifier monitoring from the driver seat.

Advanced sound tuning controls

Fine tune your system with integrated crossover and bass controls for clean, accurate low frequency response.

Audio tuning features

• Frequency response from 10 hertz to 270 hertz

• Low pass filter from 35 hertz to 250 hertz

• Subsonic filter from 10 hertz to 50 hertz

• Bass boost from 0 to 9 decibels

• Input sensitivity from 6 volts to 0.2 volts

• Signal to noise ratio of 97 decibels

• Total harmonic distortion less than 0.1 percent at 4 ohm

• Damping factor of 100

Electrical and build specifications

• Class D digital monoblock design

• Single fuse rating 120 amp or 220 amp strapped

• Power and ground input 4 gauge

• Speaker output up to 12 gauge

• Dimensions 11.81 inch length x 7.4 inch width x 2.24 inch height

Warranty protection

The Down4Sound JP8 v1.5 Camo includes a 1 year manufacturer warranty for defects, with an optional half ohm warranty available for demanding low impedance setups.

---

For anyone searching for a compact 800 watt RMS camo car amplifier that combines eye catching style with verified performance, the Down4Sound JP8 v1.5 Camo delivers powerful bass, advanced tuning, and long term reliability for serious car audio systems.

Warranty Information Your new Down4Sound product is covered by 1 limited warranty if purchased from Down4Sound or an authorized Down4Sound dealer. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of listed specifications, or any product that has been modified or repaired by anyone other than Down4Sound. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. All warranty returns must be accompanied by the original sales invoice or receipt. You must contact us to request an RMA number prior to sending any returns via the RMA request form on our website. You are responsible for the cost of shipping your product back to us for warranty examination. If your product is covered under warranty, shipping back to you will be at no charge to you – if your product is replaced/repaired outside of warranty you must pay for return shipping and repair bill prior returning of the product or if no defect is found you are required to pay for return shipping only. At the sole discretion of Down4Sound your product will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Down4Sound the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return! * Extended additional warranty purchased on amplifiers take in affect from the date of purchase and must also be stated on orginal sales invoice or receipt. Refund/Return Policy: https://www.down4soundshop.com/shipping-returns/