null
PRV Audio

PRV Audio 6MR600X-NDY-4 6.5" inch 4 Ohm (X Series) Neodymium Midrange Car Speaker 600 Watts RMS (Single)

No reviews yet Write a Review
Ask Questions

PRV Audio 6MR600X-NDY-4 6.5" inch 4 Ohm (X Series) Neodymium Midrange Car Speaker 600 Watts RMS (Single)

$189.91
MSRP: $256.99
(You save $67.08 (26%))
  • SKU: PRVAudio-6MR600X-NDY-4
In Stock & Ready To Ship!
Current Stock:Only left:
Description

X-treme midrange performance defines the PRV Audio 6MR600X-NDY. This speaker showcases the breakthrough advancements of our product line like no other. After extensive development and the assembly of top-of-the-line components, we've created a midrange loudspeaker that offers long-lasting play and exceptional durability, even during intense use.

 

- 2″ inside/out voice coil wound on a high-temperature former, 8 Ohm
- Handles 600 Watts RMS with a 97.5 dB sensitivity, capable of very high output
- Low inductance and extended frequency response with wide directivity
- New generation Neodymium magnet structure
- Ideal for compact full-range applications demanding high acoustic output
- Delivers coaxial performance from a single speaker

 

The 6MR600X-NDY is the ultimate midrange loudspeaker, with output in the upper midrange frequencies comparable to a compression driver! Its naturally damped paper cone allows it to reach up to 13,000Hz.

Additionally, its extreme output eliminates the need for a high-frequency compression driver in the system, delivering 2-way coaxial performance from a single speaker!

 

Its high-energy, rare-earth neodymium motor, combined with premium materials, was selected to enhance sensitivity and power handling, delivering the finest audio details demanded by audiophiles and custom builders in car and motorcycle audio.

This midrange elevates performance with its wide frequency bandwidth, high output levels between 3,000 to 10,000Hz, and impressive 600 Watts RMS power handling. It completely eliminates the need for a compression driver in your system!

 

This midrange features a 2” double-layered copper-clad aluminum wire voice coil and a symmetrical inductance profile. Its 11 mm winding length ensures excellent heat dissipation and high sensitivity, even at high power levels, with minimal distortion.

Every aspect of this speaker is engineered for reliable and consistent high output, even when pushed to its limits. This design allows you to achieve high-fidelity sound with low distortion, ensuring the best possible listening experience.

 

GENERAL SPECIFICATIONS

Nominal Diameter 6″ (152 mm)
Nominal impedance 8 Ohm
Nominal Power Handling* 300 Watts
Continuous Program Power (RMS)** 600 Watts
Max Peak Power*** 1200 Watts
Sensitivity 2.83V at 1m 97.5 dB
Recommended Hi Pass Crossover
For Full Power Handling
160 Hz
12db Per Octave Crossover
Frequency Response 90 – 13,000 Hz
Voice Coil Diameter 2″ (50 mm)
Voice Coil Wire CCAW
Voice Coil Winding Depth 11.0 mm
Former Material Kapton
Magnetic Gap Depth 8.0 mm
Frame Material Die Cast Aluminum

 

- *Nominal Power Handling:* Defined as the maximum RMS power the speaker can handle over a 2-hour test with pink noise featuring a 6dB crest factor and a bandpass filter with 12dB/oct tuned to its usable frequency range.

- **Continuous Program Power (RMS):** The maximum power the speaker can handle during a regular musical program using our recommended filters. This rating helps define the optimal amplifier power to provide a clean signal without clipping or saturation.

- ***Max Peak Power:** The highest power level the speaker can handle for brief moments, typically during music peaks. Sustaining this power for longer periods will damage the speaker.

 

THIELE-SMALL PARAMETERS

Equivalent Volume Vas 5.56 l
Excursion (mathematical)*** Xmax 3.50 mm
Free Air Resonance Fs 95.2 Hz
Mechanical Factor Qms 15.64
Electrical Factor Qes 0.22
Total Factor Qts 0.22
Cone Area Sd 143 cm²
Mechanical Mass Mms 15.84 g
Bl Factor Bl 15.84 Tm
Dc Resistance Re 6.5 Ohm
Inductance Le 0.023 mH at 1 kHz
Mechanical Mass Without Air Mmd 13.39 g
Mechanical Compliance Cms 0.195 mm/N

 

***Xmax = (Voice coil winding depth - Magnetic Gap depth) / 2 + Magnetic Gap Depth / 4

 

EXTRA INFO

Overall Diameter 6.48” (164.5 mm)
Front Mount Baffle Cutout 5.63” (143 mm)
Mounting Depth 3.09” (78.5 mm)
Overall Depth 3.43” (87 mm)
Net Weight 4.63 Lbs (2.1 kg)
Shipping Weight 5.00 Lbs (2.3 kg)
Carton Dimensions W x L x H 7.0”x 7.0” x 4.25” (178 x 178 x 108mm)

 

PRV AUDIO 6MR600X-NDY DATASHEET

WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov View our Return Policy.