PRV Audio QS800.4 2 Ohm (QS Series) Full Range 4 Channel Car Amplifier 140 Watts x 4Ch
Brand : PRV Audio
- SKU:
- PRVAudio-QS800.4-2ohm-Amp
The QS Series amplifiers boast an efficient design, offering full-range frequency response at an excellent price.
The QS800.4 model features a regulated power supply, consistently delivering power with an impressive efficiency rate of 80–90%, all within a compact aluminum heatsink.
- Delivers 4 x 220 watts TRUE RMS certified at full range output with Digital Class D Brazilian Technology.
- This 4-channel car audio amplifier, stable at 2 Ohms, allows for wiring multiple speakers and distributing power per channel.
- Engineered for maximum efficiency, ensuring optimal performance from your vehicle’s electrical system.
- Compact design with a small footprint makes installation easy anywhere in the vehicle: 8″ Wide x 7.90″ Length x 2.65″ Height.
- 2-Channel Bridged mode doubles the power output to your speakers by bridging two channels, with a minimum impedance of 4 Ohms per bridged channel and an output power of 2 x 450 Watts RMS.
| Channels | 4 Channel |
| Rated RMS Power at 14.0 V at 2 Ohm | 4x 220 Watts |
| Rated RMS Power at 14.0 V at 4 Ohm | 4x 140 Watts |
| Bridged Rated RMS Power at 14.0 V at 4 Ohm | 2x 450 Watts |
The QS series is our latest line of high-wattage full bridge amplifiers, offering exceptional value for your money. Available in models like the QS400.4 and QS1200.4, these 4-channel amplifiers are designed for versatility.
With a wide frequency response, the QS series can be used for various applications, including subwoofers, midbass, midrange, full-range speakers, phenolic drivers, titanium drivers, and super tweeters. This versatile amplifier is the ideal solution for daily car audio systems.
Its compact heatsink delivers high-fidelity sound, providing precise midbass punch and crystal-clear highs. This amplifier is ideal for those seeking maximum sound quality and power at an affordable price.
The proprietary heat dissipation design, featuring high airflow cooling fans, ensures the amplifier stays cool even during the most demanding playlists.
GENERAL SPECIFICATIONS
| Impedance | 2 Ohm |
| Channels | 4 Channel |
| Rated RMS Power at 14.0 V at 2 Ohm | 4x 220 Watts RMS |
| Rated RMS Power at 14.0 V at 4 Ohm | 4x 140 Watts RMS |
| Bridged Rated RMS Power at 14.0 V at 4 Ohm | 2x 450 Watts RMS |
| Average Efficiency | 82% |
| Operating Voltage | 9 to 15 Volts |
| Musical Current Draw | 45 A |
| Minimal Power Wire Input | (OFC) 4 Gauge wires |
| Built-in Crossover | Fixed HPF & LPF at 90 Hz |
| Minimal Speaker Wire Output | 14 Gauge |
| Frequency Response(-3dB) | 20 – 25,000 Hz |
| Min. Input Sensitivity for Max. Output | 200 mV |
| Signal Input | 2 Pair RCA |
| Signal to Noise | >90 dB |
| Protection System | High Temperature / Short circuit on Output |
| Heat Sink Type | Heavy Duty Cast Aluminum |
| Dimensions ( Width x Depth x Height ) | 7.90″ x 8.00″ x 2.65″ |
| Weight | 3.80 Lbs |
**PRV Audio QS800.4 2 Ohm Compact 4 Channel Car Audio Amplifier: 4 x 220 Watts RMS at 2 Ohms**
**Before Installing:**
To ensure optimal performance, follow the product's installation instructions carefully. If you have any questions, please contact us. Always adhere to these guidelines before using the amplifier:
- Make sure the amplifier is switched off before adding or removing any connections to prevent possible damage to equipment.
- Keep all cables as far away as possible from ignition cables, electronic injection modules, and starter switches to avoid noise interference.
- Always use 100% copper wire and high-quality connectors to ensure reliability and performance.
- Ensure that cables do not touch sharp metal edges to avoid damage. Important: Use a 60A fuse 12 inches from the battery as a safety precaution.
The power rating data is based on tests conducted in the PRV Audio Group laboratory. Rated power is tested with a 100Hz to 1KHz sinusoidal signal and THD <= 1%, with a resistive load corresponding to the indicated measurements. Note that electronic components and the manufacturing process can cause variations, leading to measurement discrepancies. This amplifier is designed for music applications (with speakers); resistive load tests are not recommended.
PRV Audio products are guaranteed against any manufacturer's defects in material and workmanship under normal use for ONE (1) YEAR from the original purchase date.
The power ratings are based on data from the PRV Audio Group laboratory. Measurements are taken with a frequency reference of 100Hz to 1kHz and THD+N ≤ 1% at the specified impedances. Due to potential variations in electronic components and the manufacturing process, there may be slight discrepancies in these measurements. This amplifier is designed for optimal performance in music applications (with speakers) and is not recommended for resistive load tests.
