null
Categories

Sundown Audio SD-4 10" D2 Neo Shallow Mount Subwoofer | 600W RMS

Brand : Sundown Audio

(No reviews yet) Write a Review
MSRP: $430.99
$318.99
(You save $112.00 )
SKU:
SundownAudio-SD-4-10D2-Subwoofer

Out of stock

Sundown Audio SD-4 10" D2 Neo Shallow Mount Subwoofer | 600W RMS

The Sundown Audio SD-4 10" D2 Neo Shallow Mount Subwoofer is part of the SD v.4 Neo Series, Sundown’s premier shallow-mount sealed box solution and the direct successor to the SD-3. Built for today’s depth-restricted installations, the SD-4 delivers big bass performance in a compact footprint with 600 watts RMS power handling, rugged construction, and world-class sound quality.


Shallow Mount Design for Tight Installs

Most sealed-box applications face mounting depth limitations, and the SD-4 was designed to overcome them. By eliminating a pole vent, the motor can mount flush against the enclosure back wall, while the all-new “W” foam surround reduces the space needed in front of the cone. The result is an effective mounting depth nearly 2” less than most traditional shallow subwoofers — making it one of the most space-efficient high-performance subs available.


Advanced Motor & Cooling Technology

  • Lightweight Neodymium Motor – Strong, compact, and reduces angled depth requirements compared to the SD-3.

  • Side-Firing Gap Venting & OD Pole Channels – Engineered airflow for superior cooling without rear clearance.

  • Large Aluminum Faraday Ring – Smooths frequency response while reducing distortion.

  • Shorting Ring – Further minimizes inductance variation for precise, clean bass.


Precision Sound Quality Engineering

The SD-4 features an under-hung motor topology — the coil stays fully within the magnetic gap during operation. This provides an extremely flat BL curve and ultra-low distortion, giving you accurate, tight, and dynamic bass response. With 14.5mm of linear excursion (one-way), the SD-4 10" D2 is optimized for small sealed enclosures where space is limited but big output is required.


Rugged Construction for Daily Use

  • RMS Power Handling: 600W RMS

  • Voice Coil Configuration: Dual 2 Ohm (D2)

  • Voice Coil: 2.5” black aluminum former with 8-layer high-temp copper winding

  • Surround: Computer-optimized “W” foam surround for reduced clearance and improved strength

  • Frame: Patented high-strength cast aluminum frame

  • Durability: Stitched-on tinsel leads, spring-loaded terminals, and a reinforced spider system


Key Features at a Glance

  • 600W RMS Power Handling

  • Dual 2 Ohm Voice Coil (D2)

  • 14.5mm Xmax (one-way by 70% BL)

  • Lightweight Neo Motor for compact installs

  • Under-hung motor for low distortion

  • High-strength cast aluminum frame for durability

  • Optimized for small sealed enclosures


Why Choose the Sundown SD-4 10" D2?

The Sundown Audio SD-4 10" D2 Neo Subwoofer is the perfect choice for enthusiasts who demand high-quality bass in tight spaces. Its shallow-mount design, rugged build, and advanced Neo motor technology allow it to outperform traditional shallow subs while fitting into modern vehicles with limited enclosure depth.

Whether for daily driving, SQ-focused builds, or compact SPL setups, the SD-4 10" D2 delivers clean, powerful, and reliable bass in a space-saving package.

SPECIFICATIONS

T/S SPECS SD-4 10″ D2
RE (Ohms) 3.90
FS (Hz) 27.4407
VAS (L) 36.1729
Qes 0.5687
Qms 4.9232
Qts 0.5098
Le (mH) 5.8856
BL (NA) 14.4713
Mms (Grams) 177.0601
Cms (uM/N) 189.9892
Sens (dB @ 1w/1m) 82.93

ENCLOSURE SPECIFICATIONS

Sealed Enclosure 0.5-0.75 cu ft
Ported Enclosure Not Recommended
Recommended Tuning N/A
Recommended Port Area N/A
Displacement 0.09 cu ft
Depth 4.43″
Outside Diameter 10.86"
Cut-Out 9.20"
Physical Dimensions Download