Synergy Audio SYN 15" inch DVC Dual 2 Ohm (SYN Series) Car Subwoofer 1250 Watts RMS

Synergy Audio is proud to bring you our new Synester Series 1250 rms subwoofer. Starting with a triple 190mm diameter Y35 strontium ferrite magnet slugs, bolted between a 20mm thick low carbon steel top plate washer and a one piece bumped bottom plate T-Yoke with an extended pole. A pole chamfer at the top and a flared vent along with 12 magnetic gap vents on the bottom plate create maximum cooling. We utilized a high temperature  4 layer 3″ voice coil, black aluminum former wound with high temp aluminum wire for high power handling. We utilized a non pressed pulp paper cone with red double stitching, a high roll foam surround and dual red 10″ nomex spiders with stitched tinsel leads to assure a strong, accurate loud daily subwoofer. We tooled a 6 spoke heavy duty cast aluminum frame finished in gloss black finish to assure an accurate, reliable and mechanically stable musical platform all the while looking great and sounding SYNESTER. 

Specifications: 15D4 

• Re = 6.40 ohm
• Fs = 33.829Hz
• Sd = 834.690 cm
• Bl = 25.358 Tm
• Qms = 7.955
• Qes = 0.796
• Qts = 0.653
• SPL = 89.4 dB
• Vas = 58.210 L
• Cms = 58.838m mm/N
• Mms = 376.187 g
• Voice Coil = 3.00″
• RMS Power = 1250 watts
• Suggested Ported = 3.0 – 4.0 ft^3
• Cutout Diameter: 14.125"
• Mounting Diameter: 15.5625"

Specifications: 15D2 

• Re = 4.00 ohm
• Fs = 33.256Hz
• Sd = 834.690 cm
• Bl = 23.136 Tm
• Qms = 7.710
• Qes = 0.650
• Qts = 0.600
• SPL = 89.8 dB
• Vas = 54.406 L
• Cms = 73.010m mm/N
• Mms = 416.478 g
• Voice Coil = 3.00″
• RMS Power = 1250 watts
• Suggested Ported = 3.0 – 4.0 ft^3
• Cutout Diameter: 14.125"
• Mounting Diameter: 15.5625"