Sundown Audio Team 10K Amplifier | Monoblock | 10000W RMS

Sundown Audio Team10K Amplifier | 10,000W RMS Class D Monoblock

Undeniable Power. Proven Performance. Built for the Elite.

The Sundown Audio Team10K is the ultimate powerhouse for extreme car audio builds. Delivering a jaw-dropping 10,000 watts RMS at 1 ohm, this Class D monoblock amplifier is engineered specifically for SPL competitors, high-output demo builds, and bassheads who crave serious performance. Want more? Strap two Team10Ks together and unleash up to 20,000 watts RMS — enough to rattle roofs and dominate the lanes.

Built on Sundown’s high-efficiency Class D platform, the Team10K features a dual MOSFET PWM power supply, advanced thermal management, and multiple protection circuits for unmatched durability. Whether you’re pushing your system to its limits during competitions or running a demo for hours, this amp delivers clean, stable power without compromise.

Included is a wired remote bass knob with real-time monitoring, giving you immediate access to voltage, temperature, and clipping status — so you stay in control when it matters most.

CERTIFIED DYNO RUN 12412W @1OHM (14.04 VDC)

UNCERTIFIED DYNO RUN TO CLIPPING 13529W (13.8 VDC)

DYNAMIC RMS POWER 18830W @ 1OHM (15.06 VDC)

DYNAMIC RMS POWER 13306W @ 1OHM (14.32 VDC)

Technical Specifications:

Power Output (RMS @ 14.4V):

• 1 Ohm Mono: 10,000W
• 2 Ohm Mono: 7,000W
• 4 Ohm Mono: 4,000W
• 2 Ohm Strapped (Linked): 20,000W

General:

• Class D Digital Monoblock Design
• Dual MOSFET PWM Power Supply
• Efficiency: > 97% (at 4 Ohms)
• Input Sensitivity: 6V – 0.2V
• Frequency Response: 15Hz – 264Hz
• Signal-to-Noise Ratio: 91 dB
• Damping Factor: > 400
• THD: < 0.1%
• Working Voltage: 9V – 16.5V

Controls & Filters:

• Low Pass Filter: 35Hz – 250Hz (24 dB/Oct)
• Subsonic Filter: 10Hz – 50Hz (24 dB/Oct)
• Bass Boost: 0 – 9 dB @ 45Hz
• Phase Shift: 0 – 180°

Connectivity & Extras:

• RCA Inputs/Outputs (for Master/Slave Linking)
• Wired Remote Control with:
• Voltage Display
• Temperature Display
• Clipping Indicator

Protection Features:

• Thermal
• Voltage
• Speaker Short
• DC Offset

Fuse Rating:

• 1000A (External – not built-in)

Dimensions:

• 27.55" (L) x 11.82" (W) x 3.06" (H)

If you’re ready to take your build to the next level, the Sundown Audio Team10K is your ticket to elite performance and unmatched power. This is more than just an amp — it’s the heart of a winning system.